Release Notes for Designer Cloud
Designer Experience is hosted on Alteryx Analytics Cloud (AAC). For more information on the underlying platform, go to Release Notes for Alteryx Analytics Cloud Platform.
April 18, 2025
What's New
Tool Names and IDs Shown on Each Tool
Introduced a setting in the "View" menu that lets you toggle the visibility of Tool IDs and Names on the canvas. This setting is enabled by default, and you can turn it off via View > Tool Names & IDs.
This feature improves user efficiency and clarity by making it easier to identify tools, locate errors, and navigate workflows. It addresses the challenge of distinguishing tools when IDs are difficult to recognize, enhancing the overall user experience.
April 11, 2025
What's New
Multi Column Binning Tool Now Available in Cloud Native Mode
You can now use the Multi Column Binning tool in Cloud Native mode. This tool allows you to apply consistent binning logic across multiple columns at once, helping streamline data preparation and ensure uniform grouping across datasets.
April 4, 2025
What's New
Dynamic File Naming in Output Data Tool
File-based connectors now support parameterization for output file names:
String Parameterization: Insert dynamic string values into file names.
Timestamp Parameterization: Include job start date/time or relative timestamps, adjusted for time zone.
Runtime Overrides: Update parameter values before you execute workflows.
For details, go to Output Data Tool.
March 7, 2025
What's New
Enhancements to Summarize Tool
Added tooltips to the Summarize tool to provide clearer guidance on how to configure it, making it easier to use.
February 21, 2025
What's New
Enhancements in Cloud Native Mode
These expressions are now available in Cloud Native Mode:
Between: Tests if x is between min and max values, inclusive of min and max values.
AverageNonNull: Returns the average of a list of numbers. Null values are excluded.
ToRadians: Converts a numeric degree value (x) to radians.
ToDegrees: Converts a numeric radian value (x) to degrees.
CEIL: Returns the smallest integer greater than or equal to x.
Floor: Returns the largest integer less than or equal to x.
GetLeft: Returns the left part of String until the first instance of the specified 1 or more Delimiters. The delimiter must be static (string literal).
GetRight: Returns the right part of String after the first instance of the specified 1 or more Delimiters. The delimiter must be static (string literal).
GetPart: Uses the specified 1 or more Delimiters to divide String into substrings, and returns the substring specified in Index. The delimiter must be static (string literal).
DateTimeQuarter: Returns the numeric value for the quarter of the year in which a date-time value falls. Use optional numeric parameter to indicate the start month for Q1 (1-12).
FindNth: Finds the Instance (nth occurrence) of Target in Initial String and returns the 0-indexed position of Instance. The Target and Instance must be static values.
EqualStrings: Compares 2 strings to determine if they are an exact match. Returns True if all characters in both strings are identical, and False if 1 or more characters are not identical.
IsLowercase: Returns True if String has at least one lowercase letter and no uppercase letters, ignoring non-alphabetic characters.
IsUppercase: Returns True if String has at least one uppercase letter and no lowercase letters, ignoring non-alphabetic characters.
Fixed Issues
We fixed an issue where copying and pasting a tool on the canvas, the pasted node did not always shift as expected under specific conditions.
If the cursor remained over the original node while pasting, the first paste would shift, but the second paste would be placed directly over the original node. Subsequent pastes resumed shifting behavior.
If the cursor was moved away before pasting, then returned to the original node and pasted again, the new node would overlap before resuming normal shifting behavior.
Copying and pasting tools now consistently shift as expected, preventing overlapping placements and improving workflow efficiency.
February 7, 2025
Fixed Issues
Fixed various scenarios where the "Out of Sync" popup appeared incorrectly, even when the workflow was up to date.
January 24, 2025
What's New
Enhancements in Cloud Native Mode
These expressions are now available:
Bound (Min/Max): Retrieves the minimum or maximum value.
FinancePMT (Finance): Calculates the payment for a loan based on constant payments and interest rates.
StrSpn (String): Returns the length of the initial segment of a string that consists only of specified characters.
StrCSpn (String): Returns the length of the initial segment of a string that consists of none of the specified characters.
FinanceCAGR (Finance): Computes the Compound Annual Growth Rate (CAGR).
FinancePV (Finance): Determines the present value of an investment based on a discount rate and future cash flows.
Enhancements in Standard Mode
The DateTimeNow tool is now available, allowing you to easily retrieve the current date and time.
Fixed Issues
Fixed an issue where workflows shared with a group of users could not be opened by members of that group.
January 17, 2025
What's New
Enhancements in Cloud Native Mode
Users can now view the Total Row Count for the full dataset in addition to the Sample Row Count. This functionality is currently available for workflow inputs and outputs:
Input tool: When uploading a new file or using an existing dataset:
Hovering over the Row Count displays the last calculation date, as dataset sizes may change over time.
Users can manually recalculate the row count to get updated results.
Output tool: When executing a Full Run, the system calculates the Total Row Count for the newly created output dataset.
UI Update
The Sample/Dataset Row Count will now be displayed in the IRG header with left alignment.
Databricks Integration for Live Query Execution
Users can now leverage Databricks as the execution engine to enable a Design-Time Experience with full dataset visibility. In Cloud Native Mode, users can activate Live Query on a workflow for real-time data access.
Fixed Issues
Fixed an issue that prevented resizing the Cell Viewer window when opening the Results grid in a new window.
Known Issues and Limitations
Dataset Row Count is not calculated in certain cases: When using a CSV file as input and a Cloud Database as output (or vice versa).
Dataset Row Count is not available mid-workflow in the following scenarios:
On any tool except Input and Output.
When joining datasets.
On tools with multiple output anchors.
January 10, 2024
What's New
Enhanced Notifications for Standard Mode Workflows
Added a new notification message for workflows in Standard Mode. If data loading in the Result Grid exceeds 15 seconds, you receive a clear notification to enhance transparency and user experience.
December 20, 2024
What's New
Enhancements to Designer Cloud Landing Page
Updated the visual layout with new styling.
Introduced a navigation panel on the right side of the page for quick access to cloud product materials.
Improvements to Result Grid and Cell Viewer Functionality
Enhanced the Cell Viewer to update content with a single selection of any record in the grid.
Enabled column metadata display when you select a column with Cell Viewer enabled.
You can now resize the Cell Viewer window.
Cloud Native Tool Additions
These tools are now available for Cloud Native workflows:
New Cloud Native Expressions
These expressions are now supported in Cloud Native workflows:
FinanceXNPV
FinanceNominalRate
FinanceNPER
FinanceEffectiveRate
TANH
Fixed Issues
Fixed an issue where workflows opened from the Designer Cloud Landing Page displayed outdated metadata instead of the newly opened workflow’s metadata.
6. Dezember 2024
Was gibt es Neues
Optimiertes Formel-Tool
Sie haben im Formel-Tool nun die Möglichkeit, alle Ausdrücke zu erweitern oder zu reduzieren. Für ein reibungsloseres Benutzererlebnis merkt sich das Tool nun, ob die Ausdrücke erweitert oder reduziert waren, wenn ein Workflow erneut geöffnet wird.
Behobene Probleme
Wir konnten ein Szenario beheben, bei dem Benutzer mit der Berechtigung „nur betrachten“ über Pläne dennoch Workflows ausführen konnten.
21. November 2024
Was gibt es Neues
Standardmodus in einem Dual-Paletten-Benutzererlebnis
Am 21. November wird die doppelte Palette in allen Arbeitsbereichen verfügbar sein (mit Ausnahme derer, die die private Datenverarbeitung aktiviert haben). Alteryx hat die Dual-Palette für alle Benutzer und Administratoren freigegeben.
Auch nachdem die Dual-Palette aktiv ist, werden die zuvor erstellten Workflows weiterhin in der Bibliothek angezeigt. Diese Workflows wurden im Cloud-Native-Modus erstellt. Mit der Dual-Palette können Sie jetzt bei neuen Workflows zwischen dem Cloud-Native-Modus und dem Standardmodus wählen.
Erfahren Sie mehr darüber über Sinn und Zweck der beiden Modi.
15. November 2024
Was gibt es Neues
Aktualisierungen für den Standardmodus
Wir haben die Palette an Standardmodus-Tools um Column Info Tool erweitert.
Wir haben die Palette an Standardmodus-Tools um Auto Column Tool erweitert.
Sie können im Formel-Tool jetzt einzelne Formelausdrücke deaktivieren.
8. November 2024
Was gibt es Neues
Verbesserungen Im Standardmodus
Dem Zeilen-ID-Tool wurde die Option Gruppieren nach hinzugefügt, um die Gruppierung von Daten zu erleichtern.
Das Zusammenfassen-Tool gestattet nun die Aktionen Produkt, Anzahl eindeutig sowie Anzahl eindeutig nicht Null.
Die Optionen Verschachtelung der JSON-Spalte aufheben und Array vereinfachen wurden zum JSON-Parse-Tool hinzugefügt. JSON-Daten lassen sich so effektiver verarbeiten.
Behobene Probleme
Wir konnten ein Problem beheben, bei dem während der Initiierung einer vollständigen Workflow-Ausführung die Meldung „Stimmt nicht überein“ angezeigt wurde. Workflows können nun reibungsloser und ohne Unterbrechungen ausgeführt werden.
1. November 2024
Was gibt es Neues
Der Ausdruckseditor des Formel-Tools wurde verbessert, um ein reibungsloseres und intuitiveres Benutzererlebnis zu schaffen.
Links aus dem Hilfemenü öffnen sich nun in einem neuen Fenster.
18. Oktober 2024
Was gibt es Neues
Neue Konnektoren für Standardmodus-Workflows
Wir unterstützen nun auch die folgenden Cloud-Datenkonnektoren in Standardmodus-Workflows...
Amazon RDS MySQL
Amazon RDS Postgres
Amazon RDS SQL Server
MongoDB
MongoDB Atlas
MySQL
Postgres
Redshift
Snowflake
SQL Server
Teradata
Cloud-Native-Modus: Ersetzen von Sonderzeichen
Bisher wurden alle Sonderzeichen in Spaltennamen automatisch von Designer Cloud durch Unterstriche ersetzt. Durch die Aktualisierung können Sie dieses Verhalten jetzt steuern. Unter Optionen > Workflow-Einstellungen finden Sie nun eine neue Option, um das Ersetzen von Sonderzeichen und fremden Buchstaben zu aktivieren bzw. zu deaktivieren. Das Gleiche ist über das Zahnradsymbol im Canvas möglich.
Diese Einstellung ist jedoch nur im Cloud-Native-Modus verfügbar. Standardmodus-Workflows ersetzen Sonderzeichen nicht automatisch durch Unterstriche, weshalb es diese Einstellung hier nicht gibt.
Behobene Probleme
Wir konnten ein Problem beheben, bei dem das Ergebnisraster nicht aufhörte, zu laden, wenn CSV-Dateien mit Sonderzeichen hochgeladen werden. Datei-Uploads sollten jetzt reibungslos ablaufen.
Außerdem wurde ein Fehler behoben, bei dem Zeichenfolgendaten vom Datenfelder-auswählen-Tool falsch in das DateTime-Format konvertiert wurden. Zeichenfolgendaten werden jetzt nur dann in DateTime-Daten konvertiert, wenn sie gültig sind. Die Daten bleiben also stets im vorgesehenen Format.
04. Oktober 2024
Was gibt es Neues
Neue Autorisierungslogik für den Designer Cloud-Zugriff
Die Autorisierungslogik für den Zugriff auf Designer Cloud wurde aktualisiert. Der Zugriff auf die Cloud-App wird nun von Workflow-Berechtigungen gesteuert, die mit zugewiesenen Produktrollen verknüpft sind. Um die Designer Cloud-App zu öffnen, müssen Sie über Ausführungsberechtigungen
für Workflows verfügen. Hier zu Referenzzwecken die Workflow-Berechtigungen, die für jede Cloud-Rolle gewährt werden:
Designer Cloud Consumer:
Lesen
undAusführen
.Designer Cloud Creator:
Erstellen
,Lesen
,Aktualisieren
,Löschen
,Freigeben
undAusführen
.
Beachten Sie, dass Admin-Rollen nur über die Berechtigungen Lesen
und Löschen
verfügen. Sie können die Designer Cloud-App also nicht öffnen.
Neue Ausdrücke für den Cloud-Native-Modus
Den entsprechenden Tools im Cloud-Native-Modus wurden die folgenden Ausdrücke hinzugefügt:
asin
(Mathematik)atan
(Mathematik)atan2
(Mathematik)tan
(Mathematik)compareepsilon
(Tests)
Verbessertes Zusammenfassen-Tool
Sie können Spalten im Zusammenfassen-Tool nun nach Spaltenname und Typ sortieren.
27. September 2024
Was gibt es Neues
Neue Option „Spalten anheften“ für IRG
Im interaktiven Ergebnisraster (IRG) ist jetzt die Option Spalten anheften verfügbar. Verwenden Sie „ Spalten anheften“ , um eine oder mehre Spalten einzufrieren, wenn Sie mit großen Datasets arbeiten. Sie können sich so auf bestimmte Spalten konzentrieren, ohne den Workflow selbst zu ändern, da er nur zur Beobachtung dient.
Erfassung von Audit-Ereignissen
AAC erfasst jetzt Audit-Ereignisse, die vom Workflow-Dienst ausgelöst wurden. Dazu gehören die folgenden Ereignisse ...
create_workflow
import_workflow
delete_workflow
workflow_run_initiated
export_workflow
update_workflow
remove_access_workflow
share_access_workflow
rename_workflow
set_workflow_version_name
Unterstützung für Ausgabeparametrisierung
Die Ausgabeparametrisierung wird jetzt über den Endpunkt Ausführung
im Workflow-Dienst unterstützt.
20. September 2024
Was gibt es Neues
Das neue Menü Weitere Aktionen wurde zum Datenfelder-ausführen-Tool, zum Spalten-anhängen-Tool, zum Verknüpfen-Tool und zum Mehrere-verknüpfen-Tool hinzugefügt. Mit dem Menü Weitere Aktionen können Sie ...
Mehrere Spaltendatentypen gleichzeitig ändern.
Spalten an den Anfang oder das Ende der Auswahltabelle verschieben.
Präfixe oder Suffixe zu Spalten hinzufügen bzw. von diesen entfernen.
Spaltenänderungen löschen oder rückgängig machen.
Fehlende Spalten entfernen oder die Auswahl doppelter Spalten aufheben.
Behobene Probleme
Wir konnten einen Fehler beheben, bei dem im Interaktiven Ergebnisraster (IRG) keine Daten angezeigt wurden, wenn Sie einen vorhandenen Workflow öffnen, oder einen Teil eines Workflows in einen neuen Standardmodus- oder Cloud-Native-Workflow einfügen.
30. August 2024
Was gibt es Neues
Es gibt jetzt Tooltip-Hinweise für abgeschnittene Zellen in Standardmodus-Workflows.
Behobene Probleme
Wir konnten ein Problem beheben, bei dem ein Rechtsklick auf den Link zwischen 2 manuell verbundenen Tools nicht registriert wurde.
Außerdem wurde ein Fehler behoben, dass Diagramme der Profilerstellung beim horizontalen Scrollen des Rasters nicht angezeigt wurden.
23. August 2024
Was gibt es Neues
Neue Standardmodus-Tools
Wir haben die Palette an Standardmodus-Tools um Imputation Tool und Dynamic Replace Tool erweitert.
Zellenbetrachter in Standardmodus-Workflows
Das Ergebnisrasters für Workflows im Standardmodus verfügt nun über einen Zellenbetrachter. Mit dem Betrachter können Sie sich direkt in Ihren Workflow-Ergebnissen einzelne Zellendaten ansehen und eine detaillierte Ansicht erhalten. Das Erlebnis bei der Datenanalyse wurde damit erheblich verbessert.
Behobene Probleme
Außerdem wurde ein Problem behoben, bei dem Canvas-Beschriftungen fehlten, wenn das Filter-Tool über den IRG-Spaltenheader hinzugefügt wurde. Anmerkungen werden jetzt korrekt angezeigt, das Workflow-Designerlebnis wurde also optimiert.
Es gab ein Problem in Standardmodus-Workflows, bei dem nachgelagerte Tools unbegrenzt weiterlaufen würden, wenn dem Eingabe-Tool ein Dataset fehlt. Auch dieses Problem haben wir behoben, und Ihre Workflows werden nun auch bei fehlenden Datensätzen wie erwartet ausgeführt.
15. August 2024
Was gibt es Neues
Workflows mit der Berechtigung „nur betrachten“ freigeben
Sie können nun Workflows mit der Berechtigung „nur betrachten“ freigeben. Diese Einschränkung ermöglicht es Benutzern ausschließlich, Workflows zu lesen und auszuführen.
Verbessertes Benutzererlebnis
Die Fehlermeldungen für fehlgeschlagene Workflow-Ausführungen wurden verbessert, wenn Sie nicht über die nötigen Berechtigungen für Verbindungen oder Datensätze im Workflow verfügen.
Verbesserte Leistung für das Formel-Tool im Cloud-Native-Modus.
Für
WF-svc v1
wurde ein neuer Endpunkt erstellt. So können Sie eine bestimmte Workflow-Version als aktuelle Version wiederherstellen.
Behobene Probleme
Wir konnten ein Problem im interaktiven Ergebnisraster beheben, bei dem die Zellenauswahl nicht mehr richtig funktionierte, wenn Balken der Datenprofilerstellung ausgewählt wurden.
09. August 2024
Was gibt es Neues
Neue Ausdrücke für den Cloud-Native-Modus
Im Cloud-Native-Modus sind jetzt die folgenden Ausdrücke verfügbar...
regex_countmatches
(Zeichenfolge)mod
(Mathematik)average
(Mathematik)randint
(Mathematik)charfromint
(Konvertierung)smartround
(Mathematik)log
(Mathematik)stripquotes
(Zeichenfolge)median
(Mathematik)pi
(Mathematik)
Standardmodus-Konvertierungsfehler
Es gibt nun eine neue Fehlerart für Standardmodus-Workflows – Konvertierungsfehler. Konvertierungsfehler werden durch falsche Datentyp-Konvertierungen oder Konvertierungen mit manchen Ausnahmefehlern ausgelöst (sie blockieren nicht die Ausführung nachgelagerter Tools). Konvertierungsfehler werden im IRG-Meldungsbereich angezeigt.
Behobene Probleme
Wir konnten einen visuellen Fehler bei Kommentaren auf dem Canvas beheben, wenn ein Workflow mit der Rolle „Designer Cloud Consumer“ geöffnet wird.
02. August 2024
Behobene Probleme
Konvertierungsfehler für den Standardmodus werden im IRG-Meldungsbereich jetzt korrekt angezeigt.
Wenn eine Palette deaktiviert wurde, lassen sich Tools jetzt nicht mehr per Doppelklick zum Canvas hinzufügen.
26. Juli 2024
Was gibt es Neues
Neue Standardmodus-Tools
Wir haben die Palette an Standardmodus-Tools um Dynamic Select Tool und JSON Build Tool erweitert.
Behobene Probleme
Wir konnten ein Problem beheben, bei dem weiterhin ein Engine-Fehler angezeigt wurde, wenn im Dynamisch-umbenennen-Tool eine zweite Eingabe vorgenommen bzw. eine Eingabe daraus entfernt wurde. Außerdem wurde ein Problem behoben, bei dem das IRG auf Hinzufügen oder Löschen der Verbindung nicht reagierte.
19. Juli 2024
Was gibt es Neues
Verbraucherrolle (Consumer)
Wir haben die neue Rolle „Designer Cloud Consumer“ hinzugefügt. Als Designer Cloud Consumer können Benutzer Workflows öffnen, anzeigen und ausführen. Beim Öffnen von Workflows sehen Benutzer eine Oberfläche, die sich nicht bearbeiten lässt. Hier ist die Tool-Konfiguration deaktiviert, die Tool-Palette ausgeblendet, und der Canvas lässt sich nicht aktualisieren.
Standardmodus und Cloud-Native-Modus
Wir haben neue Symbole hinzugefügt, um den Tool-Modus Ihres Workflows zu repräsentieren. Workflows im Standardmodus tragen ein Blitzsymbol, während Cloud-Native-Workflows mit einer Wolke gekennzeichnet sind.
Behobene Probleme
Workflow-Freigabe
Das Verhalten bei der gemeinsamen Nutzung verschachtelter Datensätze durch die Workflow-Freigabe wurde behoben. Obwohl einige Datasets nicht durch die gemeinsame Nutzung des Workflows freigegeben werden konnten, blockieren sie nun nicht mehr die Freigabe anderer Datasets mit den entsprechenden Berechtigungen.
12. Juli 2024
Was gibt es Neues
Datenprofilerstellung im Pushdown-Modus
Verbesserte Datenprofilerstellung im Pushdown-Modus. Numerische Diagramme zeigen jetzt Quartile an, basierend auf dem Datenbereich in der Spalte.
Verknüpfen-Tools
Die Fehlermeldung für das Verknüpfen-Tool bei fehlenden Verknüpfungsspalten im Konfigurationsfenster wurde verbessert.
5. Juli 2024
Was gibt es Neues
Qualitätsverbesserungen
Wenn ein Workflow-Name auf der Landingpage abgeschnitten wird, können Sie ihn nun per Mouseover im Ganzen anzeigen.
Bei den optionalen Tool-Ankern erinnert nun ein Tooltip daran, dass Sie diese nicht verbinden müssen, um den Workflow auszuführen.
Aktualisiertes Datenfelder-auswählen-Tool
Sie können nun alle Änderungen rückgängig machen, die im Fenster des Datenfelder-auswählen-Tools vorgenommen wurden.
Behobene Probleme
Wir konnten ein Problem beheben, bei dem Workspace-Administratoren keine E-Mail-Benachrichtigungen mehr erhalten, wenn sie Arbeitsbereiche mit diesen teilen.
27. Juni 2024
Was gibt es Neues
Ankündigung der öffentlichen Vorschau des Standardmodus
Wir stellen vor: Eine neue Funktion in Designer Cloud, der Standardmodus! Der Standardmodus ist jetzt in der öffentlichen Vorschau für alle Arbeitsbereich-Administrator verfügbar.
Standardmodus im Dual-Paletten-Benutzererlebnis: Arbeitsbereich-Administrator können in ihren Arbeitsbereichen jetzt den Standardmodus aktivieren. Das bietet Benutzern ein Dual-Tool-Paletten-Benutzererlebnis.
Administratorsteuerung: Alle Arbeitsbereich-Administrator haben Zugriff auf eine neue Einstellung in den Arbeitsbereichseinstellungen, um den Standardmodus ein- oder auszuschalten.
Verbessertes Benutzererlebnis: Wenn ein Arbeitsbereich-Administrator den Standardmodus in Ihrem Arbeitsbereich aktiviert, erhalten Sie über eine Dual-Palette Zugriff auf die Tools „Standardmodus“ und „Cloud-Native-Modus“. In Ihrem Workflow können Sie zwischen den vertrauten Cloud-Native-Tools und den neuen Standardmodus-Tools wechseln. Profitieren Sie jetzt bei der Erstellung Ihrer Workflows von noch mehr Flexibilität und Optionen.
Um mehr zu erfahren, sehen sie sich das verfügbare Standard Mode Tools an und vergleichen Sie Cloud Native Mode Versus Standard Mode in Designer Cloud.
Weitere Aktualisierungen
Mit dem Verknüpfen-Tool können Sie nun Spalten mit dem Datentyp
Datum
miteinander verbinden.
23. Mai 2024
Behobene Probleme
Folgende Probleme wurden in der aktuellen Version behoben:
Abschnitt | Beschreibung |
---|---|
TBOX-10109 | Es wurde ein Problem behoben, bei dem keine Daten im Ergebnisraster angezeigt wurden, wenn Sie ein Mehrere-verknüpfen-Tool verbunden und dann den ersten Eingabeanker ausgewählt haben. |
TBOX-10095 | Es wurde ein Problem behoben, bei dem die Leiste zur Datenprofilerstellung nicht hervorgehoben wurde, wenn Sie eine Spalte mit Bool-Datentyp im Ergebnisraster ausgewählt haben. |
TBOX-9869 | Es wurde ein Problem behoben, bei dem ausgeblendete Spalten im Ergebnisraster angezeigt wurden, wenn zwischen „Datenansicht“ und „Metadatenansicht“ gewechselt wurde. |
17. Mai 2024
Was gibt es Neues
API-Referenz und Endpunkte
Eine neuer Workflow-Service-API stellt eine Liste aller Versionen bereit, die für einen bestimmten Workflow erstellt wurden.
Es wurde ein neuer Workflow-Service-Endpunkt erstellt, um die Liste der unterstützten Tools in Designer Cloud bereitzustellen. Passen Sie die Abfrage an, um auch eine Liste der Tools abzurufen, die sich derzeit in der Entwicklung befinden oder nur für einen bestimmten Modus gelten (Standard- oder Cloud-Nativ-Modus).
Behobene Probleme
Folgende Probleme wurden in der aktuellen Version behoben:
Element | Beschreibung |
---|---|
TBOX-9864 | Wir konnten einen Fehler beheben, bei dem falsche Diagrammwerte der Datenprofilerstellung im Ergebnisraster angezeigt werden. |
3. Mai 2024
Was gibt es Neues
Canvas-Verbesserungen
Sie können jetzt eine Version Ihres Workflows in Designer Cloud speichern. Um eine Version Ihres Workflows zu speichern, gehen Sie auf Datei > Version speichern.
25. April 2024
Was gibt es Neues
Tool Verbesserungen
Das Mehrere-verknüpfen-Tool ist jetzt in der Designer Cloud verfügbar. Verwenden Sie das Mehrere-verknüpfen-Tool, um zwei oder mehr Eingaben auf Grundlage einer Gemeinsamkeit zwischen den Eingabetabellen zu verknüpfen. Standardmäßig gibt das Tool eine vollständige äußere Verknüpfung aus.
Behobene Probleme
Folgende Probleme wurden in der aktuellen Version behoben:
Element | Beschreibung |
---|---|
TBOX-10038 | Wir konnten ein Problem beheben, bei dem Daten im Ergebnisraster falsch angezeigt wurden, wenn der Wert einen Bindestrich enthielt. |
TBOX-10015 | Wir konnten ein Problem beheben, bei dem die Funktion Spaltendaten kopieren im Ergebnisraster die Spaltenüberschriften nicht kopiert hat. |
TFFY-2012 | Wir konnten ein Problem beheben, bei dem die Standardschriftgröße für Kommentare falsch war. |
19. April 2024
Was gibt es Neues
Canvas-Verbesserungen
Das Verhalten der Schaltfläche Zeilen-ID im Ergebnisraster wurde angepasst. Bei der Auswahl von Zeilen-ID werden nun alle Zellen ausgewählt, anstatt die vorherige Auswahl zu entfernen. Das gilt auch, wenn im Ergebnisraster noch andere Elemente ausgewählt wurden.
Behobene Probleme
Folgende Probleme wurden in der aktuellen Version behoben:
Element | Beschreibung |
---|---|
TBOX-10025 | Wir konnten einen Fehler der Landingpage von Designer Cloud beheben, bei der dort keine Workflows angezeigt wurden, wenn Sie die Workflow-Sortierfunktion aktiviert haben. |
12. April 2024
Was gibt es Neues
Canvas-Verbesserungen
Verbesserte Fehlermeldungen für vollständige Ausführungen. Anstelle einer allgemeinen Fehlermeldung, erscheint auf der Seite „Auftragsverlauf“ jetzt ein Popup-Fenster mit einer spezifischen Beschreibung.
Diese neue Fehlermeldung gilt nur für bereits vorhandene Fehler.
Wenn eine Zelle im Raster mehrere Zeilen enthält (z. B. bei einem Codeblock), wird die Zelle nun im Ergebnisraster hervorgehoben. So lässt sich einfach erkennen, dass nur ein Teil der Zelle sichtbar ist. Um den vollständigen Wert der Zelle anzuzeigen, doppelklicken Sie im Ergebnisraster auf die Zelle, um den Zellenbetrachter aufzurufen.
Tool Verbesserungen
Die Tool-ID wird nun mit einem Doppelkreuz (#) angezeigt, nicht mit Klammern.
Behobene Probleme
Folgende Probleme wurden in der aktuellen Version behoben:
Element | Beschreibung |
---|---|
TBOX-9992 | Wir konnten einen Fehler beheben, bei dem der Vorschlagsbereich bei der Auswahl aller Zellen in einem Raster nicht ordnungsgemäß geschlossen wurde. |
TBOX-9981 | Wir konnten einen Fehler beheben, bei dem fälschlicherweise die Verknüpfung Alle Zeilen auswählen ausgelöst wurde, wenn Sie zuvor eine andere Spalte ausgewählt haben. |
5. April 2024
Was gibt es Neues
Canvas-Verbesserungen
Wenn Sie einen freigegebenen Workflow aktiv bearbeiten, und eine andere Person dessen Namen ändert, werden Sie nun nach dem Speichern des Workflows über die Namensänderung benachrichtigt.
Behobene Probleme
Folgende Probleme wurden in der aktuellen Version behoben:
Element | Beschreibung |
---|---|
TBOX-9957 | Die Formulierung für Filteroptionen in den Spalten-Headern des Ergebnisrasters wurde angepasst. |
28. März 2024
Was gibt es Neues
Canvas-Verbesserungen
Sie können nun Daten aus einer ausgewählten Spalte im Ergebnisraster kopieren. Um die Daten aus einer ausgewählten Spalte zu kopieren, gehen Sie auf das Drei-Punkte-Symbol in der Kopfzeile des Ergebnisrasters und dann auf Kopieren. Sie können die Spaltendaten mit oder ohne Header kopieren.
Es gibt jetzt einen neuen Tastaturbefehl namens „Alle auswählen“. Damit können Sie alle Musterdaten im Ergebnisraster auswählen. Außerdem können Sie über den Zeilen-ID-Header alle Daten im Ergebnisraster auswählen.
Um alle Daten im Ergebnisraster zu kopieren, gehen Sie dort auf das Drei-Punkte-Symbol im Header und dann auf Kopieren. Wählen Sie dann nach Bedarf Alle Zellen mit Headern kopieren oder Alle Zellen ohne Header kopieren aus. Nachdem die Daten kopiert wurden, zeigt ein Popup-Fenster an, wie viele Zeilen kopiert wurden.
Wir haben das Design der Kontextmenüoptionen im Ergebnisrasters aktualisiert.
Behobene Probleme
Folgende Probleme wurden in der aktuellen Version behoben:
Element | Beschreibung |
---|---|
TBOX-9978 | Das Verhalten beim Bearbeiten eines Kommentars auf dem Canvas wurde verbessert. Bei jeder Änderung eines Kommentars wird jetzt automatisch gespeichert. |
TBOX-9971 | Wenn der Zugriff auf Designer Cloud entzogen wird, während ein Benutzer einen Workflow bearbeitet, wird er auf eine „Zugriff verweigert“-Seite umgeleitet. |
23. März 2024
Was gibt es Neues
Canvas-Verbesserungen
Im Ergebnisraster sind jetzt Vorschläge mit mehreren Spalten verfügbar.
Unter Windows drücken Sie Strg und klicken dann auf eine nicht benachbarte Spalte, oder ziehen bei gedrückter Umschalttaste einen Bereich benachbarter Spalten.
Mac-Benutzer drücken ⌘ und klicken dann auf eine nicht benachbarte Spalte, oder ziehen bei gedrückter Umschalttaste einen Bereich benachbarter Spalten.
Gemäß den von Ihnen ausgewählten Spalten werden im gleichnamigen Bereich verschiedene „Vorschläge“ angezeigt.
Sie können jetzt per Rechtsklick auf der Landingpage neue Workflows in einer neuen Registerkarte oder einem Fenster erstellen.
Beim Ziehen von Tools an den Rändern im Canvas wurde die Navigation verbessert.
15. März 2024
Was gibt es Neues
Canvas-Verbesserungen
Im Informationsbanner gibt es nun eine Schaltfläche Duplizieren, wenn ein Beispiel-Workflow geändert wird. Sie können Ihre Workflows also einfacher duplizieren.
Behobene Probleme
Folgende Probleme wurden in der aktuellen Version behoben:
Element | Beschreibung |
---|---|
TBOX-9954 | Wir konnten ein Problem beheben, bei dem das Ergebnisraster abstürzte, wenn ein nicht ausgewähltes Ausgabe-Tool gelöscht wurde. |
TBOX-9946 | Wir konnten einen visuellen Fehler beheben, bei dem Diagramme der Datenprofilerstellung fälschlicherweise als Wertebereich und nicht als exakte Werte angezeigt wurden, wenn der Datentyprückschluss ausgewählt wurde oder Sie diese Auswahl aufhoben. |
February 23, 2024
What's New
Canvas Improvements
Updated icons for selected anchors on the canvas:
Dynamic Rename tool optional input anchor
Union tool input anchor
Added the ability to select multiple tools on the canvas, right-click, and add them all to a new container.
Suggestions Improvements
Added the ability to keep or delete selected rows in a grid for downstream processing through a new suggestion.
Resolved Issues
These issues were resolved in the current release:
Item | Description |
---|---|
TNAU-1504 | Fixed an issue where the Cross Tab tool gave a null value when trying to sum zero values. |
February 9, 2024
What's New
Canvas Improvements
Updated behavior for Data Profiling charts:
For String and DateTime columns, we added a footer at the bottom of the Data Profiling chart which displays the number of the displayed values versus all the unique values inside the column.
For Numeric columns, Data Profiling bars are now grouped per 25 items in a section instead of displaying a single bar for each unique value in a column.
Tool Enhancements
New math expressions Pow and SQRT are now available.
You can now paste data with new lines in the Text Input tool.
Resolved Issues
These issues were resolved in the current release:
Item | Description |
---|---|
TBOX-9915 | Fixed a defect that caused Data Profiling charts to display incorrectly for Numeric columns when the Data Type inferring functionality is turned off. |
TBOX-9910 | Fixed a Data Profiling defect where charts were not displayed for some String columns when columns in a grid were enabled or disabled. |
February 2, 2024
Resolved Issues
These issues were resolved in the current release:
Item | Description |
---|---|
TBOX-9905 | Fixed a defect where an Out of Sync popup appeared right after the full run, even though the current workflow had the up-to-date version. |
TNAU-1490 | Lookup table keyboard navigation improvements. |
TNAU-1436 | Text Input tool usability fixes. |
TNAU-1424 | Tile Tool supports manual grouping with float columns. |
TNAU-1420 | Fixed a usability issue for the Cross Tab tool so that New Column Names does not autofill anymore. |
January 25, 2024
What's New
Canvas Improvements
You can now schedule a workflow within Designer Cloud. Select File > Schedule to access the scheduling options for your workflow.
Updated the color for the Results Grid header so it aligns with the background color for the rest of the grid.
Enabled the ability to search specific workflows by name on the Designer Cloud landing page.
Tool Enhancements
Enhanced error rendering for the Formula tool.
Resolved Issues
These issues were resolved in the current release:
Item | Description |
---|---|
TBOX-9867 | Fixed a defect where a Data Cleansing tool was incorrectly configured when added through the Results Grid header. A cleansing action was applied to all the columns in the dataset instead of one. |
TNAU-1186 | Fixed a usability issue with the dropdown in the Join tool. |
January 19, 2024
Resolved Issues
These issues were resolved in the current release:
Item | Description |
---|---|
TNAU-1368 | Improved UI experience for the Join tool. |
TNAU-1360 | Fixed an issue with the Data Cleansing and Weighted Average tools so the tools are now auto-populated with values. |
January 5, 2024
What's New
Canvas Improvements
Enhanced tool selection behavior on the canvas:
If you select a tool on the canvas, the output anchor for the selected tool opens in the Results Grid.
If you add a tool to the canvas through right-click, Suggestions, or the Results Grid header, the output anchor for the added tool opens in the Results Grid.
If you select a tool with a configuration error, the Messages tab in the Results Grid opens.
Updated styling for selected tools on the canvas.
Suggestions Improvements
Enabled new types of suggestions for Date and DateTime columns: DateTimeDiff and DateTimeAdd. These selections allow you to add or substract from each value in a column within some specific date range (day, month, year, min, seconds).
Workflow Sharing Improvements
If you try to update a workflow with revoked access, you are redirected to the Designer Cloud landing page and any changes made are not saved.
If you try to run a workflow with revoked access, you are redirected to the Designer Cloud landing page.
If you try to run a workflow that was deleted by another user, a notification appears that notifies you that the workflow was deleted.
Tool Enhancements
New Running Total tool is now available in Designer Cloud. Use Running Total to calculate a cumulative sum per row in a dataset.
Improved error message appearance on the canvas for the Join tool if you remove the join columns from the tool configuration.
Improved error message appearance for the Find Replace tool so the Lookup Table and Column to Search are now highlighted if they are empty in the tool configuration window.
Resolved Issues
These issues were resolved in the current release:
Item | Description |
---|---|
TNAU-1242 | Fixed an issue for the Transpose tool where warning and error icons were displayed incorrectly in the tool configuration window and on the canvas if columns were missing. |
TBOX-9811 | Fixed a defect which allowed the launch of the Resampling process even though no columns were in the dataset. |
TBOX-9837 | Fixed an issue with displaying DateTime columns in incorrect format by disabling the Data Type Inferring checkbox and refreshing the page. |
December 14, 2023
What's New
Canvas Improvements
Enhanced the behavior for the Workflow Out of Sync dialog, which is displayed your workflow was updated by someone else before you. Select Refresh to reload your workflow instead of the whole browser page.
Enabled the ability to filter workflows on the Designer Cloud landing page for Admin and Non-Admin users.
Workspace Non-Admin users are now able to filter by Owned, Shared, and All workflows.
An additional filter option is available for workspace Admin users. Admin users can now filter through Unowned workflows. Unowned workflows consist of all the workflows available on the workspace where the owner is not a current user.
Resolved Issues
These issues were resolved in the current release:
Item | Description |
---|---|
TBOX-9765 | Fixed an issue where a double scroll was displayed while editing large annotation text on the canvas. |
December 8, 2023
What's New
Suggestions Panel Improvements
Text to Columns suggestions allow you to quickly and efficiently split data in the Results Grid into separate rows or columns. When you brush over a single character in a value in the Results Grid, you are given suggestions for ways to split this value into multiple rows and columns using the brushed character as a delimiter.
Tool Enhancements
Selected anchors have a new color so they are easier to see.
IRR and XIRR finance expressions are available in the Summarize tool.
Resolved Issues
These issues were resolved in the current release:
Item | Description |
---|---|
TBOX-9761 | Fixed incorrect behavior with workflow movement when you hover over or select a large annotation text on the canvas. |
TDCS-335 | Fixed an issue in Plans where workflows scheduled to run at the same time were run multiple times. |
November 30, 2023
What's New
Canvas Improvements
Updated color of selected anchors.
A Workflow Out of Sync dialog now appears if you try to navigate away from your workflow without auto-save. Interacting with the dialog will not affect your workflow.
If you try to go to a Designer Cloud page that doesn't exist, you are redirected to the landing page.
The mini-map has been turned off by default to allow you to have more space within the canvas.
Results Grid Improvements
Enabled the ability to collapse the Results Grid to make more space for the canvas and tool configuration windows. Changes made to the Results Grid height are saved for the next time you open your workflow.
Updated the filter style for the messages displayed in the Result Grid.
Resolved Issues
These issues were resolved in the current release:
Item | Description |
---|---|
TBOX-9734 | Fixed issue where the list of workflows on the Open Workflow dialog only displayed on half of the list after you select a workflow. |
TBOX-9752 | Fixed a canvas defect where adding an Input Data tool with the same dataset as other Input Data tools caused the Input Data tools to reload. |
November 17, 2023
What's New
Canvas Improvements
Enabled ability to view last 5 jobs runs inside Output tool. Additionally, below the job list is displayed a link on the Jobs History page.
Results Grid Improvements
Enabled the ability to collapse Result Grid so there is more space for the canvas and tool configuration window. If you change the size of the Results Grid, your changes are saved for the next time you open your workflow.
Suggestions Panel Improvements
Regex selections are now available in Designer Cloud. "Brush" or select a portion of data that matches a certain pattern you are interested in, like a specific string format within a field. Based on your selection, new suggestions that utilize the RegEx tool are shown (specifically parse, replace, and split functionality).
Automated Regex Generation: Automatically generated regular expressions that match the selected pattern.
Regex-Based Suggestions: Parse data that matches the pattern, replace values that match the pattern, or split the column into multiple columns based on the detected pattern. Hover over the suggestions to see a preview of the results of the suggested Regex operation.
If the initial suggestion isn't quite right, you can adjust or modify the Regex operation manually using the Edit Suggestion functionality.
Resolved Issues
These issues were resolved in the current release:
Item | Description |
---|---|
TBOX-9664 | Fixed an issue with failed Data Profiling charts when enabled on Select, Union, Join, Append Fields tools. |
November 3, 2023
What's New
Canvas Improvements
You can now share Designer Cloud workflows between different users of the same workspace. Workflows can be shared from the Platform Library page under the 3 dot menu. If several users modify the same workflow at the same time, a notification is displayed for the person who has an outdated workflow version. Workspace Admin users are also now able to filter all or only owned workflows on the Designer Cloud landing page.
Tool Enhancements
The Multi-Column Formula tool is now available in Designer Cloud. Use this tool to create or update multiple columns using a single expression.
Resolved Issues
These issues were resolved in the current release:
Item | Description |
---|---|
TBOX-9756 | Fixed a defect that prevented scrolling large tool annotations while editing. |
TBOX-9668 | Fixed a defect with an incorrectly displayed placeholder in the Result Grid caused by unchecking and checking all the columns in the dataset through the Select tool. |
TFFY-1706 | Fixed a UI defect related to tool containers. Selection of all the tools on the canvas would display tools that are hidden inside the tool container. |
TFFY-1696 | Fixed a defect where the Run button was disabled for an extended time while adding changes to a workflow and triggering the auto-save functionality. |
TFFY-1556 | Fixed a defect where a canceled full workflow job on the job history page still showed as "In Progress". |
October 26, 2023
What's New
Tool Enhancements
The Dynamic Rename tool is now available in Designer Cloud. Use this tool to rename the columns passing through the data stream.
Canvas Improvements
Implemented a new loading spinner within the Results Grid that shows when you upload data or when data is trying to load in the grid.
Resolved Issues
These issues were resolved in the current release:
ID | Description |
---|---|
TBOX-9682 | Fixed a defect where the Results Grid was incorrectly displaying multiple spaces (leading and trailing whitespace) in the grid cells. Now all spaces are displayed in cells the same way that the data is stored in the original dataset. |
TBOX-9660 | Fixed an issue where Data Profiling charts were loading multiple times. |
October 20, 2023
What's New
Canvas Improvements
Improved error messaging when data can't be loaded in the Results Grid.
Tool Enhancements
Added the Columns to Group By option to the Random % Sample tool.
Fixed an issue for the Round function within the Formula tool.
October 13, 2023
What's New
Alteryx Engine Updates for Designer Cloud
Updates have been made to Alteryx Engine. You may notice some differences in data processing:
The Sort tool preserves the original order of data in the unsorted columns.
The last valid year is “9999”.
Grouped tools may have a different order.
Alteryx Engine uses a different Regex Library. The handling some of regex expressions can vary.
When selecting unique rows based on a column, Alteryx Engine might select a different row. The output order from the Unique tool might also be different. For example, in a table of addresses, if you select unique rows based on zip code, the updated Alteryx Engine might select a different address with that zip code.
Suggestions Panel Improvements
You can now brush over a value in the Results Grid and use the Keep/Delete Rows suggestions. These suggestions use the Filter tool.
Suggestions preview displays a source column for the operation for certain suggestion types:
RegEx Parse
Formula Extract
RegEx Split into Columns
Data Cleansing suggestions are now available for float data type columns within the Results Grid and through data profiling by selecting the data quality bars. Data Cleansing can also now be accessed through the Results Grid header.
Replace suggestions using the Formula tool with brushing functionality are now available.
The preview panel for suggestions now displays a footer that shows the number of rows used to preview the future change.
Resolved Issues
These issues were resolved in the current release:
ID | Description |
---|---|
TBOX-9695 | Fixed an issue where Data Profiling charts would remain stuck on loading animations for previously viewed columns when horizontally scrolling through the grid. |
TBOX-9656 | Fixed an issue where long values were not truncated in the Results Grid. |
TBOX-9643 | Fixed an issue where the Data Profiling section was not displaying correctly when enabled on the Text Input tool. |
TKP-519 | Fixed an issue with failed Data Profiling charts by changing some integer data type columns with years data. |
TNAU-1214 | The Find Replace tool now correctly replaces & symbol with 'Match Whole Word' checkbox. |
TNAU-1213 | Fixed the Contains and Create Columns with Replace Data combination for numeric values represented as strings for the Find Replace tool. |
TNAU-1249 | TheFind Replace tool now correctly replaces the same words if they are in different case. |
September 14, 2023
What's New
Canvas Improvements
New keyboard navigation added to switch between tool anchors. Use the Tab key to focus on a tool, then select and hold Ctrl+Alt and use the Up and Down arrow keys to select the tool anchor. See Keyboard Shortcuts in Designer Cloud for a list of all keyboard shortcuts.
September 8, 2023
What's New
Tool Enhancements
The Random % Sample tool is now available in Designer Cloud. Use Random % Sample to return an expected number of rows that result in a random sample of the incoming data stream.
Suggestions Panel Improvements
Improved the Brushing - Extract suggestion so when extracting values from Int data type columns, the new column will be also added with an Int data type.
New Brushing suggestions added:
Brushing - Keep and Delete Rows suggestions: When you highlight a value in the Results Grid, a suggestion appears to either keep or delete the highlighted rows.
Brushing - Replace suggestions: When you highlight a value in the Results Grid, a suggestion appears to replace the highlighted values.
Workflow Improvements
When you run a workflow in Designer Cloud, you have an option to select the engine it runs on. We now keep that engine selection per workflow, per user, so it doesn't need to be selected each time.
You can now navigate to a URL with a workflow ID in it even if your session is not active. If you have access to the workflow, after authentication, you are redirected to the workflow.
Resolved Issues
These issues were resolved in the current release:
ID | Description |
---|---|
TKP-535 | Fixed a defect where a new column was added when a user applies an extract suggestion for a second time. |
TKP-555 | Fixed a defect for Brushing – Extract suggestion where the previous value was still showing in the Text to Extract input while choosing a new column. |
TBOX-9590 | Fixed an issue where the 'No results to display' empty state occasionally displayed in the Results Grid when switching between tools and anchors. |
August 31, 2023
What's New
Results Grid Improvements
New Brushing suggestions allow you to highlight values in the Results Grid with your cursor and view suggested transformations. To view Brushing suggestions, select and drag your cursor over a value in the Results Grid. The suggestions panel with automatically open with relevant suggestions for your selected data.
Updated Results Grid empty states.
Updated the default placeholder text in the Messages section when no messages are available for a tool or workflow.
Updated styling and messaging for these empty states:
No data passing through.
No tool connection.
No results to display.
No columns visible.
No columns selected.
Resolved Issues
These issues were resolved in the current release:
ID | Description |
---|---|
TBOX-9599 | Fixed a defect for tools with multiple output anchors where accessing the Resampling was unavailable through the Results Grid if Resampling was in progress on one of the anchors. |
TBOX-9597 | Fixed a defect for tools with multiple output anchors where accessing Resampling from the Results Grid was opening the wrong output anchor inside the tool configuration window. |
August 17, 2023
What's New
Results Grid Improvements
Enabled the ability to start Resampling directly through the Result Grid.
Aligned the names of filter operators between the Filter tool and Results Grid column header and Suggestions panel.
Resolved Issues
These issues were resolved in the current release:
ID | Description |
---|---|
TKP-432 | Fixed a visual defect where the Suggestions panel overlapped the last selected column. |
August 8, 2023
Resolved Issues
These issues were resolved in the current release:
ID | Description |
---|---|
TFFY-1522 | Fixed an issue with auto-save in the case the user closes the tab right before it calls the API. |
August 2, 2023
What's New
Resampling for Designer Cloud
Resampling, accessed through the tool configuration window, allows you to collect new sample data and manage different samples used in your workflow. You can resample data on all Designer Cloud tools. For more information on Resampling, see Resampling für Designer Cloud.
Suggestions Panel Improvements
Trigger suggestions by selecting a single bar in the data profiling chart or a single portion of the data quality bars (Ok, Not Ok, Null, Empty). Designer Cloud automatically triggers intelligent suggestions, accelerating data preparation and transforming your raw data into actionable insights faster than ever before.
Resolved Issues
These issues were resolved in the current release:
ID | Description |
---|---|
TKP-490 | Fixed a defect in the Data Profiling chart with incorrect filtering through profiling bars for Numeric columns if the minimum or maximum value in the column is equal to zero. |
TKP-488 | Fixed a defect in the Data Profiling chart with the minimum range value for the selected profiling bar was not highlighting correctly. |
TKP-345 | Renamed filter operators for boolean columns to align names with functionality inside the Filter tool. |
TKP-462 | Fixed a visual defect where an error border did not appear around the Output Column Name input while changing the string length for the Formula tool. |
TKP-441 | Fixed incorrect wording inside the Suggestions Panel when there is no column selected. |
July 28, 2023
What's New
Results Grid Improvements
You can now Split into Rows based on a delimiter from the Results Grid column header.
The Rand() function is now available in the expression library.
Suggestions Panel Improvements
New Round() function suggestion for float columns. You can now select the column header to trigger a rounding suggestion in the Suggestions Panel. This suggestion uses the Formula tool and gives you the opportunity to quickly choose a rounding preferences without having to write a formula.
New Length() function suggestion for String columns. This suggestion allows you to calculate the number of symbols inside each column cell.
Resolved Issues
These issues were resolved in the current release:
ID | Description |
---|---|
TKP-440 | Fixed an issue with broken Suggestions panel preview. |
TBOX-5551 | Fixed an issue with incorrect results displaying in Data Profiling section by enabling it on the Filter tool. |
TBOX-9507 | Fixed UI defect where incorrect Results Grid column header menu or sub-menu displayed by scrolling horizontally. |
TFFY-1516 | Fixed an issue where trying to delete a tool too quickly after Designer Cloud loads caused the application to freeze. |
July 20, 2023
What's New
Results Grid Improvements
Restricted ability to use negative values for Number of Columns for the Split into Column action.
Minor UX improvements for Clean Up Data action.
July 13, 2023
What's New
Results Grid Improvements
Enhanced error validation for Split into Columns action in the Results Grid header. The validation error is now rendered by selecting 'Empty' for the input and then selecting Apply.
Canvas Improvements
Updated the Alteryx Help link in the Help menu.
Added Databricks as an engine option. Note that this engine is only available if your configuration is setup correctly in the management console.
July 7, 2023
What's New
Results Grid Improvements
Enhanced filtering added to the Results Grid header. Additional filter operators are now supported: 'Is Empty', 'Is Not Empty', 'Contains', and 'Does Not Contain'.
Enhanced Messages functionality:
If any warning message is triggered for a particular tool, this message will be shown on the canvas, similar to how error messages are currently displayed.
A count of workflow and tool messages is displayed inside the Anchor section of the Results Grid.
Enabled the ability to trigger the 'Split to Column' action directly from the column header menu.
Enabled the ability to filter data through the Data Quality Bar. Now, selecting a Data Quality Bar state adds a Filter tool to the canvas with the selected configuration.
Resolved Issues
These issues were resolved in the current release:
ID | Description |
---|---|
TKP-384 | Fixed incorrect border around the Message tabs in the Results Grid. |
TBOX-9505 | Fixed an issue where the tool configuration window would not render an appropriate error message when dataset permissions were revoked for the selected dataset. |
June 29, 2023
What's New
Results Grid Improvements
Opening the Results Grid in Firefox browser is now supported.
Suggestions Panel Improvements
Optimized suggestions performance for large data sets.
Canvas Improvements
Updated engine selection API to make it more efficient.
Resolved Issues
These issues were resolved in the current release:
ID | Description |
---|---|
TBOX-9497 | Fixed a visual issue for selecting columns with a long name inside the Result Grid. |
TKP-311 | Fixed an issue where no suggestion previews displayed while hovering over Rename suggestions. |
TFFY-1474 | Fixed an issue where the sample workflows weren't showing accurate errors before you run the workflow. |
TFFY-1319 | Fixed an issue where the Run Job button was still enabled, even if the Output tool wasn't fully configured, which resulted in an error. |
June 23, 2023
What's New
Results Grid Improvements
Updated wording on tooltips for leading and trailing whitespaces.
Within the Data Profiling feature, you can now select the Data Quality bar to highlight selected values in the Results Grid.
Suggestions Panel Improvements
Expanded categories within the Suggestions Panel remain expanded after editing and returning to the Suggestions Panel.
Tool Enhancements
Enhanced error messaging for these tools: DateTime tool, Sample tool, Cross Tab tool, and RegEx tool.
Resolved Issues
These issues were resolved in the current release:
ID | Description |
---|---|
TBOX-9439 | Fixed an issue where the Suggestion hover icon was not displaying when unselecting a column in the Results Grid. |
TFFY-1432 | Fixed an issue where the Run button on the Marketing workflow sample was not enabled after configuring all outputs. |
June 15, 2023
What's New
Results Grid Improvements
New 'Empty' state added to the Data Quality bar. The 'Empty' state represents the number of cells with no value inside for string columns. The calculation of Data Profiling charts for strings columns has also been adjusted. Now, the percentage of column values calculated is based on the number of empty and null cells.
If the dataset contains cells with leading or trailing whitespaces, those cells are called out in the Results Grid, allowing for easier identification of those values.
New ‘Not Ok’ state added to the Data Quality bar, which represents the number of invalid cells in the column.
Suggestions Panel Improvements
New Data Cleansing suggestions added to the Suggestions Panel. Clean data and remove leading or trailing whitespaces or remove unwanted characters by applying the recommended suggestions. Proposed options will vary based on the column data type.
Tool Enhancements
Added new expressions: Regex_Replace and ReverseString.
June 8, 2023
What's New
Results Grid Improvements
Opening the Results Grid in a new window now works on Firefox browser.
Updated Messages section. Now, the total number of messages for the workflow is displayed in the Messages window. The number of tool specific messages is shown after you select the tool.
Tool Enhancements
Improved error messaging for the Find Replace tool and the Text to Columns tool.
June 1, 2023
What's New
Engine Selection in Designer Cloud
You can now select a specific engine to run yourDesigner Cloud jobs. To select an engine, select the arrow next to the Run Job button and select your engine from the list.
Photon: Suggested for jobs up to 1 GB of data. Best for smaller jobs.
Spark: Best for larger jobs. The job runs on a distributed engine.
Snowflake: This engine is suggested in only a few cases.
Use when the source and target both are Snowflake.
Use when the source is a supported file type and the target is Snowflake.
Use when the source is Snowflake and the target is a supported file type.
Results Grid Improvements
Enabled additional data cleansing functionality inside the Results Grid to remove unwanted characters through the column header menu. Leading and trailing spaces, letters, numbers, tabs, line breaks, and other data cleansing options available in the Data Cleansing tool are now also supported in the Results Grid.
Enhanced behavior for data profiling charts. Now, if all values inside the column are unique, the data profiling chart won't be rendered. This optimizes the overall profiling performance.
Show All and Hide All column selection has been improved to truncate long column names.
Improved styling for 'No Columns Visible' empty placeholder in Results Grid.
Added a visual improvement to the Result Grid header. Now, switching to the Metadata section also shows you the number of columns in the dataset.
Created a new empty state inside the Results Grid while all columns are hidden in the Results Grid.
Updated UI styling for the Show All and Hide All column selection inside the Results Grid header.
Suggestions Panel Improvements
Enhanced behavior for the Suggestions panel with a large list of suggested actions. Now, only the first 4 options will be displayed. To view additional options, select the expand button inside the Suggestion section.
Updated the color scheme inside the Suggestions panel to align it with existing colors used in the Expression Editor.
Updated tooltip wording for the Suggestion header in the Results Grid.
Operators for Filter tool suggestions are now described with words instead of mathematical symbols.
Tool Enhancements
The Filter tool can now support numbers starting with a decimal point.
New 1 in Every N Rows will be Sampled method added to the Sample tool.
Resolved Issues
These issues were resolved in the current release:
ID | Description |
---|---|
TKP-316 | Fixed a defect where incorrect styling displayed inside the Suggestion panel while no column was selected in the Results Grid. |
TKP-314 | Fixed an issue with incorrectly displayed action name on the Suggestion panel header. |
TKP-300 | Fixed a defect where Suggestions was turning off while switching between the Data and Metadata view in the Results Grid. |
TKP-295 | Fixed an issue for the Result Grid, with no truncation on UI for the cells which contain a long value. |
TKP-286 | Fixed an issue with randomly displaying loading animation within the Suggestions panel. |
TKP-274 | Fixed an issue where switching between editing suggestions and returning to the list view returned you to the top of the Suggestions list. Now, after editing a suggestion, you are returned to your previous location in the Suggestions list. |
TKP-266 | Fixed a visual defect with incorrect styling for an empty placeholder inside the Suggestion panel while suggestions are turned off. |
TBOX-9398 | Fixed a defect with a disappearing 'empty placeholder' message inside the Result Grid by selecting twice on the output anchors for Join or Filter tools. |
TBOX-9384 | Fixed a visual defect with incorrect column selection inside the Result Grid by removing and adding new columns inside the Select tool. So now, each time you change the number of columns inside the dataset, all the selected columns will be unchecked. |
May 12, 2023
What's New
New Landing Page
The new landing page for Designer Cloud includes 2 additional sample workflows and One Tool Examples. It also now includes a link to Alteryx Academy.
Suggestions Improvements
Improved wording of tooltip on the Suggestions icon.
Preview your suggestions from the Suggestions panel prior to applying them to the canvas. Hover over the suggestion to see the new preview.
Ability to turn on and off Suggestions added. Once Suggestions are turned off, any column header selection would not lead to opening the Suggestion panel. This setting is enabled/disabled through:
Designer Cloud header inside the View menu.
Suggestion panel header using the 3-dot menu.
Updates to Loading Data with Input Tool
Updated the loading animation and experience when loading a dataset through Input Data tool.
Tool Enhancements
Enhanced UX and visual layout for the Summarize tool.
New expressions added: datetimeparse and datetimetrim.
In the expression library, the Contains function supports dynamic target argument.
Resolved Issues
These issues were addressed in the current release:
ID | Description |
---|---|
TBOX-9383 | Fixed an issue with incorrect Data Profiling chart scaling for boolean columns. |
TBOX-9309 | Fixed defect with keeping column selection by closing Result Grid in a new browser window. |
TBOX-9104 | Fixed a visual defect with displaying column header borders inside Result Grid. |
TNAU-891 | Filter tool now works with decimal numbers. |
TNAU-882 | Fixed Contains method for Find Replace tool. |
May 4, 2023
What's New
One Tool Examples Now Available in Designer Cloud
Hover over tools in the tool palette to access new One Tool Examples. Select Example to open a new workflow that you can review configurations and transformations within. You can also save the workflow to edit and run. To hide the tooltip flyouts, turn off this setting in your View options.
Edit Suggestions
Modify the default configuration for these suggestion actions:
Column Rename
Column Drop
Sorting
Filtering
In addition, you can now reselect the column to which the particular suggestion will be applied and apply edits from the Suggestions panel.
Tool Enhancements
Enhanced UX and visual layout for Arrange tool.
Updated tooltip wording for the Join tool.
Enhanced the size of tool containers to make them easier to use and expand.
Resolved Issues
These issues were addressed in the current release:
ID | Description |
---|---|
TBOX-9396 | Fixed an issue with Data Profiling crash on DateTime columns if those columns weren't visible in the Sample Results grid. |
April 27, 2023
What's New
Suggestions and CSV Export in Results Grid
Check out new Suggestions for transforming your data directly from the Sample Results window. Access suggestions by simply clicking on the column in the Sample Results window. Within the Suggestions panel, Sort Suggestion allows you to easily sort columns by Ascending or Descending order.
You can now also export sample data from a tool's anchor as a CSV file. Select Export as CSV from the More Actions menu in the Sample Results window.
Union Tool Enhancements
Updated the Union tool to enhance the usability and clarity of labels in the tool configuration panel.
Tooltips Added to Join Tool
Added tooltips to the Output Anchor Diagrams in the Join tool configuration window to help explain the differences between the output types.
Resolved Issues
These issues were addressed in the current release:
ID | Description |
---|---|
TFFY-1296 | Fixed an issue with the pagination on the landing page. |
TFFY-1298 | Selecting output anchors for tools with multiple outputs would select the wrong anchor by default, rather than the anchor the user selected. |
TFFY-1335 | Fixed an issue where some datasets would not load. |
April 13, 2023
What's New
Excel Output in Designer Cloud
Export your workflow results to an Excel workbook. For more information, see Output Data tool.
You cannot specify names of individual Excel sheets.
If an workbook of the same name exists in the target location, the file is overwritten.
Import Data for Designer Cloud in Alteryx Analytics Cloud
Import datasets for use in Designer Cloud using the Data tab in Alteryx Analytics Cloud. For more information, see Library for Data.
Updated Color and Contrast in Results Grid
Updated color and contrast for the Results Grid to enhance accessibility.
Delete Workflows from Designer Cloud Home Page
You can now delete workflows one at a time directly from the Designer Cloud home page.
Updated UI Library
Designer Cloud has been updated to use the latest UI library capabilities.
Resolved Issues
These issues were addressed in the current release:
ID | Description |
---|---|
TBOX-9350 | Infinity loading in Results Grid by adding tools with sorting functionality (Sort or Sample). |
TBOX-9292 | Data Profiling charts not rendering on columns with a DateTime data type. |
TBOX-9274 | Optimized column selection performance for a grid with enabled Data Profiling to ensure there is no visual lag when selecting a column header. Similar improvements for large datasets will be part of future enhancements. |
TBOX-8599 | Results Grid header overlaps the Expression Editor menu while expanded. |
TBOX-8285 | Tools with a long name will be truncated inside the Results Grid Message section. |
TNAU-407 | Transpose tool (and other tools with checkbox lists for column names) shows errors if some columns are missing from the input. |
New Known Issues
DateTime Tool Returns NULL Value for Japanese Browser Language
When the browser language is set to Japanese, the DateTime output column returns “NULL” values. Designer Cloud currently supports only English. To resolve this issue, ensure your browser language preference is set to English.
March 24, 2023
What's New
New Job Details Page for Designer Cloud Workflows!
After you run a Designer Cloud workflow, navigate to the Platform home page, then to the Job History page to look at specific jobs. Select a job from the list to see the Job Details, which gives you insights about the job execution, any errors, and the details of the run.
There are two limitations for the new Job Details page:
"Dataset deleted" is shown as a workflow name for deleted workflows.
As an admin, you can't see details of jobs run by others.
Annotation for Basic Filters
Annotations for the Basic Filter options in the Filter tool now appear on the canvas underneath the tool.
Second Auto Completion in Expression Editor
Second auto completion now works in the Expression Editor in the Formula tool. Previously, if you had entered a value with autocomplete and tried to add a second value, autocomplete would not trigger.
Updated Color and Styling in Mini-Map and Comments
Updated color and styling for the Mini-Map and Comment editing feature.
Data Profiling Optimization for Large Datasets
To reduce performance load, Data Profiling on large datasets is now calculated only for those columns which are visible to the user. For for the rest of the columns, Data Profiling will be executed per column ranges in order to reduce performance load with simultaneously calculated columns.
Resolved Issues
These issues were addressed in the current release:
ID | Description |
---|---|
TBOX-9316 | Fixed several scenarios that caused Data Profiling crashes by triggering some actions through the Results Grid column header:
|
TBOX-9303 | Incorrect column name displayed in the Suggestion panel while renaming a column in the Result Grid header. |
TBOX-9277 | Enabled the scroll bar inside the Result Grid Anchors section, which improved the navigation between the anchors for the Join tool when the Result Grid is collapsed. |
TFFY-1215 | Improved navigation between workflows and Input anchors, ensuring that data within the Results Grid loads properly and timely. |
March 17, 2023
What's New
Updated Colors and Contrast Throughout Designer Experience
Updated colors and contrast in the tool palette, canvas, and containers enhance the accessibility and usability of Designer Experience.
Open Workflows with "Unsupported Tools"
Improved the experience opening workflows that contain what used to be "unsupported tools", such as containers and comments, or the Input tool when you first connect to data. Previously this was causing a workflow error.
Resolved Issues
These issues were addressed in the current release:
ID | Description |
---|---|
TFFY-1215 | Improved navigation between workflows and Input anchors, ensuring that data within the Results Grid loads properly and timely. |
TFFY-1223 | Updated workflow behavior for configured and unconfigured inputs so that you are still able to add tools to inputs with data configured and the workflow will allow you to advance in your journey. Previously the input that was not configured disabled the progression of a workflow. |
TAC-262 | Output validation helps identify data errors that are preventing workflows from running. For example, if the column header in the Input source contains spaces, the validation error in the Output tool will show what needs to be fixed. |
March 6, 2023
What's New
Renaming Workflows
You can now rename workflows in the canvas header.
Notification When Job Added to Queue
You now receive a notification after you select Run and a new job is added to the queue.
February 16, 2023
This is the initial set of release notes for Designer Experience.
What's New
Designer Experience brings our familiar Designer Desktop interface to the browser for data profiling, preparation, blending, and analytics. Build intuitive visual workflows or analytics processes, all in the cloud, and easily scale and democratize analytics across your organization. Designer Experience will continuously be up to date with the latest features available, bringing new capabilities to your fingertips, effortlessly.
First Time Experience Tour
A new first time experience tour has been added to Designer Experience. This is designed to help new users get up and running in record time. For creators that are familiar with Designer Desktop, skip the tour and get right to work.
Library for Workflows
Create and review Designer Cloud workflows from the Cloud Portal. See Library for Assets Page.