Designer Cloud in Azure
Follow this guide to deploy the Designer Cloud module for Azure private data processing.
Prerequisite
Before you deploy the Designer Cloud module, you must complete these steps on the Set Up Azure Subscription and Vnet for Private Data page...
Configured a resource group dedicated to Alteryx Analytics Cloud (AAC) as mentioned in the Create Resource Group section.
Configured a Vnet dedicated to AACAAC as mentioned in the Configure Virtual Private Network section.
App registration and base IAM role attached to the service account as mentioned in the Configure IAM section.
Successfully triggered private data processing provisioning as mentioned in the Trigger Private Data Handling Provisioning section.
Subscription Setup
Step 1: Configure IAM
Step 1a: Create IAM Custom Role
You need to create a custom IAM role. Name it AAC_DesignerCloud_SA_Role and use the following role document. We recommend using the JSON tab instead of the visual editor. AACAAC requires some * permissions to run. Expect some security warnings when you create the role.
Nota
AAC_DesignerCloud_SA_Role is an example role name. You can choose any name for the role, but the name must start with AAC_DesignerCloud.
Importante
You must update the "assignableScopes" scope of this custom role. Replace <subscription ID> with your subscription ID.
{
"properties": {
"roleName": "AAC_DesignerCloud_SA_Role",
"description": "Custom role for provisioning AAC private data handling",
"assignableScopes": [
"/subscriptions/<subscription ID>"
],
"permissions": [
{
"actions": [
"Microsoft.Authorization/*/read",
"Microsoft.Compute/availabilitySets/*",
"Microsoft.Compute/locations/*",
"Microsoft.Compute/virtualMachines/*",
"Microsoft.Compute/virtualMachineScaleSets/*",
"Microsoft.Compute/cloudServices/*",
"Microsoft.Compute/disks/write",
"Microsoft.Compute/disks/read",
"Microsoft.Compute/disks/delete",
"Microsoft.Network/applicationGateways/backendAddressPools/join/action",
"Microsoft.Network/loadBalancers/backendAddressPools/join/action",
"Microsoft.Network/loadBalancers/inboundNatPools/join/action",
"Microsoft.Network/loadBalancers/inboundNatRules/join/action",
"Microsoft.Network/loadBalancers/probes/join/action",
"Microsoft.Network/loadBalancers/read",
"Microsoft.Network/locations/*",
"Microsoft.Network/networkInterfaces/*",
"Microsoft.Network/networkSecurityGroups/join/action",
"Microsoft.Network/networkSecurityGroups/read",
"Microsoft.Network/networkSecurityGroups/write",
"Microsoft.Network/networkSecurityGroups/delete",
"Microsoft.Network/publicIPAddresses/join/action",
"Microsoft.Network/publicIPAddresses/read",
"Microsoft.Network/virtualNetworks/read",
"Microsoft.Network/virtualNetworks/subnets/join/action",
"Microsoft.RecoveryServices/locations/*",
"Microsoft.ResourceHealth/availabilityStatuses/read",
"Microsoft.Resources/deployments/*",
"Microsoft.Resources/subscriptions/resourceGroups/read",
"Microsoft.Resources/subscriptions/read",
"Microsoft.Resources/subscriptions/operationresults/read",
"Microsoft.Storage/storageAccounts/*",
"Microsoft.ContainerService/fleets/read",
"Microsoft.ContainerService/fleets/listCredentials/action",
"Microsoft.ContainerService/managedClusters/listClusterAdminCredential/action",
"Microsoft.ContainerService/managedClusters/accessProfiles/listCredential/action",
"Microsoft.ContainerService/managedClusters/read",
"Microsoft.ContainerService/managedClusters/runcommand/action",
"Microsoft.KeyVault/*",
"Microsoft.Network/virtualNetworks/subnets/read",
"Microsoft.ContainerService/managedClusters/write",
"Microsoft.ManagedIdentity/userAssignedIdentities/read",
"Microsoft.ManagedIdentity/userAssignedIdentities/assign/action",
"Microsoft.Network/routeTables/routes/write",
"Microsoft.Network/routeTables/routes/read",
"Microsoft.ContainerService/managedClusters/listClusterUserCredential/action",
"Microsoft.ContainerService/managedClusters/delete",
"Microsoft.ContainerService/managedClusters/agentPools/read",
"Microsoft.ContainerService/managedClusters/agentPools/write",
"Microsoft.ContainerService/managedClusters/agentPools/delete",
"Microsoft.ContainerService/managedClusters/availableAgentPoolVersions/read",
"Microsoft.ContainerService/managedClusters/agentPools/upgradeNodeImageVersion/write",
"Microsoft.ManagedIdentity/userAssignedIdentities/federatedIdentityCredentials/read",
"Microsoft.ManagedIdentity/userAssignedIdentities/federatedIdentityCredentials/write",
"Microsoft.ManagedIdentity/userAssignedIdentities/federatedIdentityCredentials/delete",
"Microsoft.ManagedIdentity/userAssignedIdentities/delete",
"Microsoft.ManagedIdentity/userAssignedIdentities/write",
"Microsoft.Network/routeTables/read",
"Microsoft.Network/routeTables/write",
"Microsoft.Authorization/roleAssignments/write",
"Microsoft.Authorization/roleAssignments/delete",
"Microsoft.Cache/redis/*",
"Microsoft.Network/privateEndpoints/read",
"Microsoft.Network/privateEndpoints/write",
"Microsoft.Network/privateEndpoints/delete",
"Microsoft.Network/privateDnsZones/read",
"Microsoft.Network/privateDnsZones/write",
"Microsoft.Network/privateDnsZones/delete",
"Microsoft.Network/privateDnsZones/SOA/read",
"Microsoft.Network/privateDnsZones/SOA/write",
"Microsoft.Network/privateEndpoints/privateDnsZoneGroups/write",
"Microsoft.Network/privateEndpoints/privateDnsZoneGroups/read",
"Microsoft.Network/privateEndpoints/privateDnsZoneGroups/delete",
"Microsoft.Network/privateDnsZones/virtualNetworkLinks/read",
"Microsoft.Network/privateDnsZones/virtualNetworkLinks/write",
"Microsoft.Network/privateDnsZones/virtualNetworkLinks/delete",
"Microsoft.Network/privateDnsZones/join/action",
"Microsoft.Network/virtualNetworks/join/action",
"Microsoft.Insights/autoScaleSettings/write",
"Microsoft.Insights/autoScaleSettings/read",
"Microsoft.Insights/autoScaleSettings/delete"
],
"notActions": [],
"dataActions": [
"Microsoft.ContainerService/fleets/*",
"Microsoft.ContainerService/managedClusters/*"
],
"notDataActions": []
}
]
}
}Step 1b: Bind Custom Role to App Registration in the Subscription
Add the AAC_DesignerCloud_SA_Role IAM custom role to the aac_automation_sa service account created in the Create an App Registration section.
Step 2: Route Table
Create the route table for your subnets.
Importante
You must configure the Vnet with a network connection to the internet in your subscription.
Nota
This route table is an example.
Address Prefix | Next Hop Type |
|---|---|
/18 CIDR Block | v-net |
/22 CIDR Block | v-net |
0.0.0.0/0 | <gateway_ID> |
Nota
Your <gateway id> can be either a NAT gateway created per AZ or a transit gateway, depending on your network architecture.
Step 3: Configure Subnet
Designer Cloud in the private data processing requires 3 subnets.
aac_aks_node (required): The AKS cluster uses this subnet to execute Alteryx software jobs (connectivity, conversion, processing, publishing).
aac_public (required): This group doesn’t run any services, but the
aks_node groupuses it for egress out of the cluster. Delegate this subnet toMicrosoft.ContainerService/managedClusterswhich grants the AKS service permissions to inject the API server pods and internal load balancer into that subnet.aac_private (required): This group runs services private to the private data processing.
Step 3a: Create Subnet in the Vnet
Configure subnets in the aac_vpc VPC.
Follow this example to create subnets with subnet name, subnet size, and other configurations (modify values, as needed, to meet your network architecture). Attach the Network security group created in the Create Network Security Group section to the subnets.
Address Space | Subnet Name | Subnet | Service Endpoints | Route Table | Notes |
|---|---|---|---|---|---|
10.64.0.0/18 | aac_aks_node | 10.64.0.0/19 | Microsoft.Storage Microsoft.KeyVault | Attaching this subnet to a route table is optional. Azure sets up the network during AKS creation. | AKS Cluster Subnet |
10.10.0.0/22 | aac_public | 10.10.0.0/25 | Microsoft.Storage | Attach to the route table created in Step 2. | Delegate |
10.10.0.0/22 | aac_private | 10.10.1.0/24 | Microsoft.KeyVault | Attach to the route table created in Step 2. |
|
Importante
10.64.0.0/18 and 10.10.0.0/22 are an example. The subnet name must match with the name as shown in the table.
Step 4: Quota Adjustment
Adjust quotas per these parameters:
CPU Limits
Quota Name: Total Regional vCPUs
Scope: Regional
Azure default quota value: 10
Applied quota value: 2500
Quota Name: Standard Basv2 Family vCPUs
Scope: Regional
Azure default quota value: 10
Applied quota value: 2500
Step 5: Feature Registration on Subscription
To enable Host-based encryption on AKS, enable Encryption at Host on Subscription.
Private Data Processing
Atención
Si modificas o quitas cualquiera de los recursos en la nube pública aprovisionados con AAC una vez que se aprovisiona el manejo de datos privados, se produce un estado incoherente. Esta incoherencia genera errores durante la ejecución de la tarea o el desaprovisionamiento de la configuración del manejo de planos de datos privados.
Step 1: Trigger Designer Cloud Deployment
Data processing provisioning triggers from the Admin Console inside AACAAC. You need Workspace Admin privileges within a workspace in order to see it.
From the AACAAC landing page, select the Profile menu and then select Workspace Admin.
From the Admin Console, select Private Data Handling and then select Processing.
Select the Designer Cloud checkbox and then select Update.
Selecting Update triggers the deployment of the cluster and resources in the Azure subscription. This runs a set of validation checks to verify the correct configuration of the Azure subscription.
Nota
The provisioning process takes approximately 35–40 minutes to complete.
After the provisioning completes, you can view the created resources (for example, VM instances and node pools) through the Azure portal. It is very important that you don't modify them on your own. Manual changes might cause issues with the function of the private data processing.
Step 2: Assign Key Vault Permission to User-Managed Identity
After the successful creation of Private Data Handling, AACAAC creates a user-managed identity called aac-k8s-user-identity in your Azure subscription. The user-managed identity allows the Kubernetes service account to retrieve private data storage access credentials from the key vault.
Sign in to the Azure subscription in which you provisioned private data storage and private data handling.
In the Resource menu, select the key vault where you stored the private data storage credential.
Select Access policies and then select Create.
Select Get under Secret Management Operations (Secret permissions) and then select Next.
Under the Principal tab, search for
aac-k8s-user-identityand then select it.Select Next.
Under Application (optional), select Next.
Select Create.